Insulation Company in Burbank, CA
Woolsey Attic Insulation handles attic and spray foam work for Burbank homeowners, and the houses here keep us honest. Most were built between the 1940s and 1960s with lath-and-plaster walls, stucco or wood siding, and attics that were never designed for real insulation loads. Add in the valley’s hot, dry summers and you get a specific set of problems: attic heat driving cooling bills up, rooms over unconditioned spaces that bake by 4 p.m., and hillside homes with cathedral ceilings that hold no insulation at all. If you’re looking for an insulation company in Burbank that prices the job in writing before anything starts, call (669) 333-3579.
Why Burbank Homes Are Different
Burbank’s housing stock runs older than a lot of Los Angeles, and that age shows up in the attics. Homes from the 1930s through the 1950s often have little more than a thin layer of settled fiberglass up top, and many have none in the walls at all. The bigger issue here isn’t just missing R-value, though. It’s heat gain. The San Fernando Valley gets intense summer sun, and that radiation hits west-facing exposures along the hillside areas especially hard. An attic that reads 140 degrees in August transfers that heat straight into the living space below, and no amount of air conditioning fully compensates.
Homes above Glenoaks Boulevard add another layer. Many of those hillside properties have cathedral ceilings with no attic cavity to work in, which means insulation has to go in from the exterior or through interior access points with careful dense-pack work. We see this regularly on Burbank hillside jobs, and it changes the entire approach compared to a flat-lot home in the Magnolia Park area with a standard pull-down attic hatch.
Our Main Burbank Services
Burbank homeowners call us most often for two things: getting their attics properly insulated and air-sealed, and closing the gaps that regular insulation can’t reach. Each has its own dedicated page with full pricing and detail.
Attic Insulation in Burbank
Most Burbank attics are accessible but undersized, with recessed lights and ductwork running through spaces that were never planned for deep insulation. Our Attic Insulation in Burbank work focuses on air sealing first, then building R-value up to a level that actually handles valley summer heat. We’re careful around older wiring and recessed cans, and we map out baffles before blowing anything in. On a typical 1940s Burbank bungalow, that means sealing top plates and penetrations, then installing blown-in insulation to spec. Every job gets a written price before we touch the ladder.
Spray Foam Insulation in Burbank
For rooflines and rim joists where heat moves through the framing itself, Spray Foam Insulation in Burbank closes gaps that batts and blown-in material simply can’t. Open-cell foam expands on contact and seals the small air channels running through an older Burbank attic’s framing. It works especially well on hillside homes above Glenoaks where roof geometry is irregular and traditional batts leave gaps at every transition. We recommend it selectively, because it isn’t the right tool for every attic, and we’ll tell you straight if blown-in is the better fit for your roof.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service in Burbank
We install and service insulation from Owens Corning, Johns Manville, Knauf, and GreenFiber, among others. Our goal isn’t to push one brand, it’s to match the material to the Burbank job, whether that’s a dense-pack cellulose for a hillside cathedral ceiling or fiberglass for a flat attic. See our brands for the full list.
Pricing for Insulation Company in Burbank, CA
| Service | Typical range in Burbank |
|---|---|
| Attic air sealing + blown-in insulation (1,000 sq ft attic) | $1,800 – $2,600 |
| Attic insulation removal and replacement | $2,200 – $3,400 |
| Spray foam insulation (open-cell, roofline, 1,000 sq ft) | $3,500 – $5,000 |
| Spray foam insulation (closed-cell, rim joists) | $1,200 – $1,800 |
| Dense-pack cellulose for cathedral ceilings | $2,800 – $4,200 |
| Radiant barrier installation | $1,400 – $2,000 |
| Attic ventilation upgrade (ridge or gable vents) | $700 – $1,400 |
| Recessed light covers and air sealing package | $350 – $700 |
Prices in Burbank push higher when we’re working on a hillside home with limited attic access, when cathedral ceilings require exterior drilling, or when an older attic has wiring that needs to be worked around carefully. Whatever the job, you’ll get the exact written number before any work starts. That’s The Kingswell Way, and it applies to every Burbank job.
Neighborhoods We Serve in Burbank
We work throughout Burbank, including the hillside streets above Glenoaks, the Magnolia Park district, the Rancho area, and the homes near Burbank’s downtown corridor. Our crews know the access constraints these older neighborhoods present.
- Hillside District (above Glenoaks Boulevard)
- Magnolia Park
- Rancho Adjacent
- Burbank Downtown District
Typical response time for a Burbank estimate is one to two business days, and we schedule around your availability, not ours.
Service Area – Cities Near Burbank
Along with Burbank, our crews regularly serve nearby communities in the South Bay and Silicon Valley areas. If you’re just outside Burbank, we also work in Campbell, CA, San Jose, CA, Santa Clara, CA, and Cupertino, CA. Call us and we’ll confirm dispatch availability for your address.
Serving Burbank, CA - Our Local Coverage Area
We’re based in the Burbank area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Insulation Company in Burbank
Most Burbank homeowners get an estimate scheduled within one to two business days. We coordinate dispatch from our Los Angeles office, and our crews serve Burbank locally, so we’re not driving from across the region. Call (669) 333-3579 and a live person will set the appointment.
Most standard attic insulation and air sealing jobs in Burbank don’t require a permit. If your job involves structural changes or certain ventilation modifications, we’ll flag it and walk you through what the city requires. We’d rather tell you upfront than leave you holding a code violation.
Yes. Hillside homes above Glenoaks often have cathedral ceilings with no attic cavity, and we do dense-pack work from the exterior or interior to insulate them properly. It’s slower, more careful work, and we price it accurately in writing before we begin.
Call (669) 333-3579 for a free estimate on any insulation work in Burbank. A real person answers, the price is in writing before any job starts, and every installation includes the 365-Day Done Right Promise in writing.
What happens when you call
- 1A real person answersNo phone trees - talk to a local insulation pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3A background-checked tech heads outLicensed & insured, typically within 1-hour.
- 4You approve before work beginsNothing starts until you say go.
What Burbank Customers Say
"Spray foam in the crawlspace and new attic insulation. They wrote up the whole price and the two jobs came in exactly as quoted. Floors upstairs aren't freezing in the morning anymore."
- Nathan Pruitt"Showed up on time, laid down protection on the floors, and were careful going into the attic. Explained exactly what they were doing and why. House holds its heat so much better now."
- Preston Hale"The guy didn't try to sell me on foaming the whole house. He said the attic was where I'd actually feel it and left it at that. Honest, and he was right, our bills dropped."
- Angela Ruiz